First time customers recieve 20% OFF!!!!

HyTek Electronic Design will assist you at any step of the design process. From cad library management to full electronic design development. We will also help modify existing designs if needed.

Library Management Services

HyTek Electronic Design will generate PCB footprints and schematic symbols to get your project started. If needed, we will also generate 3D component models. We also provides Signal Integrity Analysis services. We will generate simulation and signal integrity models for your PCB design and perform a Signal Integrity Analysis to determine if any layout or circuit design changes are needed.

Schematic Symbols
PCB Footprints
Schematic Simulation Models
Signal Integrity Models
3D Component Models
Much more.....

 

Schematic Capture Services

HyTek Electronic Design will generate your schematic using a flat or hierarchical format. We can create a schematic from a netlist, cad drawing, or napkin. We will perform a schematic level Design for Testability analysis to determine if any circuit changes are required to help guarantee that the design will be testable.

Hierarchical Schematic Layout
Unlimited Schematic Pages
Schematic Simulation
Signal Integrity Analysis
Design for Testability (DFT)
Much more.....

 

PCB Layout Services

HyTek Electronic Design will layout your PCB from a netlist or schematic and your cad libraries. We will add any missing parts to your libraries if needed. We will import your design rules and add any schematic directives to insure that the PCB layout is as accurate as possible. All PCB layout designs go through a rigorous Design for Manufacturability and Design for Testability analysis to ensure that your PCB is testable and meets manufacturing guidelines.

High speed Digital, Analog, Mixed Digital/Analog
Single-sided to Multi-layer boards
Surface mount, Through-Hole, and Mixed Technology
Design for Manufacturability/Testability (DFM/DFT)
True 3D PCB design capabilities
Much more.....

 

Electronic Design Services

HyTek Electronic Design can design your product from the ground up. We will start with your design concept to create a hierarchical schematic and PCB libraries. Next, we will add any schematic directives to guide the PCB layout and will perform a schematic level DFT. We will create or import code for any FPGA's in the PCB design. Then, we will place and rout all components in the design and perform a DFM and board level DFT. We will also perform a Signal Integrity Analysis to insure that all electrical characteristics are met. Finally, we will generate all fabrication and assembly drawings, Gerber data, and any other manufacturing files needed to create a finished product.

Digital & Analog Circuits
Audio & Mixed Signal Circuits
FPGA Design and Embedded Programming
Signal Integrity Analysis
Design for testability (DFT)
Much more.....

 

[ Home ] [ About Us ] [ Search ] [ Contents ]   

Send mail to webmaster@hytek-ed.com with questions or comments about this web site.
Copyright © 2010 HyTek Electronic Design